Builder gel in a jar: what this page holds
This collection is built around sculpting gels that come in a pot rather than a brush bottle. At its centre is the LAVIS Builder Gel Jar, a 30ml jar line with 19 numbered shades from 00 Clear to 18 Apricot. Around it sit the gels and tools a sculpting service uses with it: LAVIS poly extension gel and its slip solution, non-sticky and carving gels for raised 3D work, LAVIS dual forms for extensions, a few hard and builder gels from IBD and CND, plus brushes, a sculpting tool, form clips and crystal dappen dishes.
A jar suits techs who like to pick up exactly the amount of gel they need with a brush or spatula and work it into the apex, instead of painting from a bottle brush. If you prefer the bottle format, the LAVIS bottle builder lives in builder gel in a bottle, and the whole private label range is on the all LAVIS products page.
The LAVIS Builder Gel Jar 30ml
LAVIS launched the 30ml jar as a 2025 line of 19 colours, with the shade name printed on the packaging. The gel has a medium thickness and is a little more fluid than a typical jar gel, which helps it level across the nail plate. It is made for sculpting, extension structure and protective overlays on natural nails.
- Clear and milky bases: 00 Clear for a see-through overlay and 01 French White for French work.
- Soft pinks and nudes: 03 Baby Pink, 04 Peach Please, 06 Pastel Mellow, 08 Uptown Girl, 11 Coquette, 13 Pink Vanilla, 14 Pink Sugar and 15 Pink Press.
- Warmer tones: 17 Ambrosia and 18 Apricot.
The jar has no brush inside, so plan for a separate sculpting brush or spatula. LAVIS recommends a dual-ended polymer brush, which works for both poly gel and jar builder, plus a liner brush to pull gel along the side walls. Every jar listing is labelled HEMA-free, and LAVIS lists its builder gel line as HEMA-free and TPO-free.
The jar builder and the LAVIS poly gel share the same shade numbers, so 15 Pink Press or 13 Pink Vanilla means the same colour in both formats. That makes it easy to sculpt a poly gel extension and finish the overlay in matching jar gel.
Jar, bottle or poly gel: which builder fits the service
| Format | How you apply it | What it needs | Typical use |
| LAVIS Builder Gel Jar 30ml | Picked up with a brush or spatula and placed at the apex | A separate brush, base gel, a UV or LED lamp | Overlays, apex building, short to medium extensions |
| Builder gel in a bottle | Painted on with the brush in the cap | Base gel and a lamp | Overlays and short extensions of about 2 to 3mm |
| LAVIS poly extension gel | Squeezed out, shaped like putty with a brush dipped in slip solution | Slip solution, a brush, forms, a lamp | Longer extensions on dual forms |
| Non-sticky sculpture gel | Moulded by hand or with a silicone tool | No slip solution | 3D flowers, charms and raised details |
A simple rule: if the job is strength on the natural nail, a jar or bottle builder does it. If the job is length, poly gel on a dual form is the faster route. If the job is decoration that stands off the nail, reach for a non-sticky gel.
Most problems with any builder come from the same few habits: layers applied too thick or too thin, too little time under the lamp, gel flooded into the cuticle or side walls, and mixing products from different brands. Thorough prep, thin layers cured one at a time and one system from base to top avoid most lifting.
Poly extension gel and slip solution
LAVIS describes its poly gel as roughly 30 percent powder and 70 percent builder gel. It holds its shape like a soft putty, so you can push it into a form without it running. Slip solution is what makes it workable: dip the brush, smooth the gel and it will not stick to the bristles. This collection carries the LAVIS New Poly Extension Gel in 30ml tubes, the 15ml tubes, the numbered non-sticky nail extension poly gels, the 100ml LAVIS Slip Solution and the LAVIS Poly Gel Brush. The full poly range, including the 60ml tubes, is on the LAVIS poly extension gel range page.
Non-sticky and carving gels for 3D work
The LAVIS non-sticky builder gel is thick and stays exactly where you put it. Because it does not stick to fingers or tools, you can mould flowers, charms and raised textures directly, with no slip solution. The LAVIS 3D Sculpture Gel works the same way for carved details and comes in Clear, Pearl White, White, Silver and Gold. Single 15g non-sticky jars, sculpting pens and charm moulds are gathered in non-sticky 3D sculpture gel.
IBD and CND Brisa hard gels
For techs who already work in another hard gel system, the page also lists a few brand names. IBD hard gel and IBD LED/UV builder gel come in 2 oz jars; French Xtreme White, Intense White and Pink are the ones currently available. CND Brisa is a 1.5 oz UV/LED sculpting gel that CND designs for overlays, tip extensions and sculpts on a form, used with CND Brisa Bond; the Clear, Warm Pink Semi Sheer and Pure White Opaque shades are available today. Whichever brand you use, keep bond, gel and finish from the same system whenever you can.
How to build a jar gel overlay
- Prep: push back the cuticle, buff off the shine and clean away the dust.
- Bond and primer: apply protein bond and primer to remove oil. They do not need curing.
- Base gel: one thin layer, cured for 60 seconds.
- Framework: pick up a small bead of jar gel and lay a very thin first layer to frame the nail.
- Apex: place a larger bead in the middle of the nail, ease it toward the cuticle without touching the skin, then glide it along the surface and the side walls with the liner brush.
- Flash cure: hold each finger under a mini lamp for 3 to 5 seconds to lock the shape.
- Full cure: cure the whole hand for 60 to 90 seconds.
- Finish: file and shape, then add colour and a top coat.
Pro tip: build in thin layers and cure each one. A single heavy layer heats up under the lamp and cures unevenly. Avoid filing the apex again once it is built, because that thins the strongest part of the nail. LAVIS recommends a UV/LED lamp of at least 24W, ideally 48W or more; see UV and LED lamps for builder gel.
Extending with dual forms
For length, LAVIS dual forms are made from a Soft Flex Gel Polymer rather than rigid plastic, so they release gently after curing. They come in clear and matte, in shapes from round and square to stiletto, coffin and long almond, mostly in 15 sizes, plus sandwich moulds and a 5-shape kit. Choose one size larger than the natural nail, fill the form with poly gel or jar gel, press it on, check the underside, cure, then release the form. The full range sits in dual forms by shape and size, and the 5-piece form clips in this collection hold each form steady while it cures.
Removal and refills
Jar and hard gels take longer to remove than bottle builder, which often soaks off like gel polish. File away about two thirds of the product, then finish with remover and gentle pushing. For a refill, take off the old colour, keep the builder base that is still sound, reshape, apply protein bond and continue from the base gel step. Refills keep clients on a regular schedule and avoid starting from the natural nail every time.
Tools that go with jar gel
- Brushes: the LAVIS Poly Gel Brush for poly and jar gel, and a liner brush for side walls. For sculpting brushes by size, see Kolinsky sculpting brushes.
- Stainless steel sculpting tool: for shaping and lifting small amounts of gel.
- Crystal dappen dishes with lids: with lids, handy for holding slip solution during a poly gel service.
- LAVIS Brush Cleaner 16 oz: for keeping sculpting brushes clean.
Buying jar gel and sets at DTK
Every jar shade is sold as a single 30ml jar, so you can reorder only the colours you use. The LAVIS Builder Gel Jar Set 18 Colors, the 18-colour poly gel set and the non-sticky 7-colour set are priced as the sum of the jars inside, so a set is about convenience and a complete colour shelf, not a lower price per jar. Prices and stock are shown on each listing. Clients who need a sensitive-skin option can also be pointed to other HEMA-free gel lines, and the wider category is on builder gel and rubber base.
Related collections
Related reads