What this V Beauty Pure acrylic page holds
This collection is the acrylic corner of the V Beauty Pure line at DTK: single Acrylic System colour jars in 1.5 oz and a small group of acrylic kits. Every powder here is a finely milled polymer that combines with an EMA monomer to form a sculptable bead for overlays, full sets, fills and sculpted extensions. V Beauty Pure describes the formula as self-leveling, MMA-free and non-yellowing when it is used with its own EMA liquid and finished under a top coat.
The page is deliberately short. The wider V Beauty Pure powder range, including the nude, white and clear cover jars sold one by one and the small 0.5 oz pigment jars for art, sits in the acrylic powder from every brand collection, and the liquid and prep bottles sit with the other monomers. Use this page when you want a numbered colour jar or a kit that already groups the shades for a service.
The 1.5 oz Acrylic System jars here
V Beauty Pure numbers its Acrylic System jars, and the number is the fastest way to reorder. The colour jars on this page are:
- #14 Excite Me and #17 Hidden Pleasure
- #29, #30 and #31, the three jars from Victoria's collection (#06, #08 and #11)
- #33 Kandy Land and #34 Poster Girl
Screens show powder colour differently, so press a little powder on a tip or swatch it with a bead before committing a full set. Because every jar uses the same polymer system, you can mix two of them on a palette for a custom shade, use one as an accent over a nude base, or encapsulate a colour under clear for depth.
The finely milled texture is what makes that work: it blends evenly with other V Beauty Pure shades, holds its shape for 3D flowers and raised details, and stays pliable long enough to refine the edges. The medium set time gives you room to sculpt and blend before the bead hardens, which matters most on long sculpted sets and detailed art.
The V Beauty Pure acrylic kits
The kits group shades so a new station or a busy chair has the basics in one order:
- Kit 1: Lustrous Pink, Luxe White and Glamorous Nude, a classic pink, white and nude trio.
- Kit 2: Prettiest Pink, Super White and Perfect Nude, the same idea with a different pink, white and nude.
- Kit 3: Soft Touch, Classic Nude and Clear, for natural overlays and encapsulation.
- Kit 4, the ombre kit: one pink and one white powder (colour chosen at packing) plus a V Beauty Pure no-wipe top coat to seal the fade.
The pink, white and nude shades in Kits 1 to 3 are also sold as their own 1.5 oz jars, so when one colour runs low you can top it up without buying the whole kit again.
Liquid and prep that complete the system
A powder only performs as well as the liquid and prep under it. V Beauty Pure builds its acrylic system in four parts, all stocked in EMA liquid and nail prep:
| Product | Role | Sizes on DTK | Key point |
| Nail Prep Dehydrator | Removes oil and moisture from the nail plate | 0.5 oz | Goes on first; air-dries, no lamp |
| Super Bond Primer | Acid-free primer that leaves a tacky layer for grip | 0.5 oz | Goes on after the dehydrator; air-dries |
| Acrylic Liquid (monomer) | Mixes with the powder to form the bead | 8 oz and 32 oz | EMA, MMA-free, low odor, medium set time |
| Acrylic System powder | Builds and colours the enhancement | 1.5 oz jars, kits | Self-leveling; air-sets, no lamp |
The liquid is compatible with most professional acrylic powders, but V Beauty Pure says consistency and colour clarity are best when the liquid and powder both come from the brand, and it recommends its own EMA liquid for this powder.
How to apply V Beauty Pure acrylic
- Prep: clean and lightly buff the nail, apply the dehydrator, then a thin coat of Super Bond. Both air-dry in seconds.
- Pour: put a small amount of V Beauty Pure liquid in a clean dappen dish.
- Pick up a bead: dip the brush into the liquid, press out the excess, then draw it through the powder to form a bead. Aim for a medium liquid-to-powder ratio.
- Place and sculpt: set the bead on the nail and shape it, keeping product away from the cuticle and capping the free edge.
- Let it set: the acrylic hardens by a chemical reaction between liquid and powder, so no LED or UV lamp is needed.
- Finish: file, shape and buff, then seal with a top coat for shine and colour protection.
Pro tip: smaller beads are easier to control than one large bead, especially when you are still learning the medium set time of this liquid.
Getting the bead right
- Too runny: too much liquid on the brush, or a warm room. Wipe more liquid off before you pick up powder.
- Too dry or grainy: not enough liquid for the amount of powder. Add liquid and work with smaller beads.
- Setting too fast: the room is warm or the bead is dry. Cooler rooms slow the set slightly.
- Setting too slow: the room is cool or the bead is wet.
- Lifting: usually prep (oil left on the plate, no dehydrator or primer), product flooded near the cuticle, a ratio that is too wet or too dry, or an uncapped free edge.
Keeping clear and light acrylic from yellowing
Yellowing on clear and white work usually comes from the process, not the powder. V Beauty Pure's guidance is to use its non-yellowing EMA liquid, keep brushes clean, avoid overheating the nail while filing, and finish with a UV-protective top coat. Store the liquid tightly sealed in a cool, dry, dark place, because light and air can thicken or discolour it over time. Work in a well-ventilated area: the formula is low-odor, but every acrylic liquid has a scent.
Finding the rest of the V Beauty Pure acrylic line
If you need a single nude, white or clear cover jar such as Glamorous Nude, Classic Nude, Luxe White or Crystal Clear, or one of the small 0.5 oz pigment jars for 3D and art, browse all acrylic and dip powders and filter by V Beauty Pure. For gel services on the same clients, the V Beauty Pure gel colors and the brand's base and top coats complete the menu, and the full V Beauty Pure range shows every family the brand has at DTK.
Related collections
Related reads