#67 Small Sanding Mandrel - 3/32" Rubber for Compact Sanding Band Work
Couldn't load pickup availability
Version: 3/32" Rubber for Compact Sanding Band Work. This listing is the #67 Small Sanding Mandrel - 3/32" Rubber for Compact Sanding Band Work, a nail drill bit. Its main job is sanding work.
Before you start
A bit set covers the service from start to finish: coarse grits for bulk, medium for shaping, fine for refining. Choosing a bit is two questions: which area of the nail, and how much product to remove. Barrels work the surface, cones and needles reach the cuticle area.
What you get
- 1 x #67 Small Sanding Mandrel - 3/32" Rubber for Compact Sanding Band Work
Why it works
- Standard e-file bit for salon drills.
Specifications
| Item | #67 Small Sanding Mandrel - 3/32" Rubber for Compact Sanding Band Work |
|---|---|
| Type | Nail drill bit |
| Bit number | #67 |
| Use | Sanding |
| Shank | 3/32" |
How to use it
- Insert: push the bit fully into the handpiece and lock it.
- Speed: start low and raise it only as far as the job needs.
- Light touch: keep the bit moving, flat to the surface, with gentle pressure.
- Check: stop often to check the shape and heat.
- Clean: brush off dust, clean and disinfect the bit, dry and store it.
Who it suits
- Techs who prep and remove with an e-file.
- Studios that want a backup on hand.
- Salons that keep spares at every station.
Related products
Nearby in this range: Rubber Mandrel for Drill Sanding Bands, 7mm Rubber for 3/32 E-File Drill, Drill Bit - 3/32 Precision Detail. Browse Nail Drill Bits & Sanding Bands, Portable Professional Nail Drills.
Care and storage
Clean and disinfect the bit after each client, dry it fully and keep it in a closed case.
Tips
- Check the size and options above before you order so the item fits the kit.
- If you are unsure which version fits the service, contact us with the brand and size you use now.
- Keep a spare on hand for busy days so a table never runs out.
Frequently Asked Questions
What do the grit letters mean?+
F is fine, M medium, C coarse, XC extra coarse and 2XC double extra coarse; finer grits refine and coarser grits remove product faster.
Will it fit my drill?+
Check the shank size in the specifications; most salon e-files take a standard 3/32 inch shank.
How do I clean drill bits?+
Brush off dust, soak in a bit cleaner or disinfectant as its label directs, rinse, dry fully and store them in a closed case.
How should I store it?+
Clean and disinfect the bit after each client, dry it fully and keep it in a closed case. Close it right after each use.